PRIME EXTERIOR 7000 is designed for outside use and equally suited to cool northern conditions as well as hot sunny climates. Typically installed at offices, schools and apartment buildings, the lift can be accustomed with any number of different options, materials and wall colours so that it can blend right into the environment. PRIME EXTERIOR 7000 comes in two different sizes and can travel up to 13 meters. Installation can be completed in a few days. The lift is supplied with a heater, ventilation system and outer roof.

 

 

Downloads

Technical data

Platform length 1480 mm
Platform width 1000 mm
Door height 2040 mm
Door width
 900 mm
Shaft depth 1600 mm
Shaft width 1375 mm
Travel height*
 250 - 13000 mm
Top height full door 2240 mm
Top height half door 1100 mm
Structural opening
 1630 x 1405 mm
Drive system Self-sustaining patented screw/nut system
Rated speed 0.15 m/s
Landing control One touch call
Platform control Hold to run
Technical compliance European machine directive 2006/42/EC
Rated load 410 kg/5 persons
Number of stops max. 6
Number of doors max. 3 doors per floor
Pit 50 mm (with ramp no pit is required)
Environment Outdoor
Environment adaption Shaft heater and ventilation, outdoor roof, IP classified door locks
Power 3-phase 400 50Hz/5.2 A/16 A slow
Emergency lowering Manual
Control supply 24 V
Motor 2.2 kW

*Optional platform size is available. see options

**Depending on installation site.

Prime XTR7000 overview

Included as standard:

• Lift painted white, RAL9003

• Interlocked doors

• Shaft heater and ventilation

• Outdoor roof

• Destination buttons, flat with Braille text

• Vinyl flooring, grey

• Door closer

• Self supporting shaft with 25 mm wall panels

Built-in functions:

• School locking

• Call and send functionality

• Integrated service diagnostic system

• Automatic light shut down

• Fire alarm drive

• Battery supervision







Included as standard:
• Interlocked doors
• Battery operated power failure lowering
• Automatic lubrication system
• Light fitting on the platform
• Ceiling
• Destination buttons, flat with Braille text
• Vinyl flooring, Medium Cherry wood finish
• Door closer
• Self supporting shaft with 25 mm wall panels
Built-in functions:
• School locking
• Call and send functionality
• Integrated service diagnostic system
• Automatic light shut down
• Fire alarm drive
• Battery supervision

 

RAL-painted door

We offer the possibility to have the single blade, frame or both painted in the colour of your choice.

 

Door opener External

Opens and closes the doors automatically for easier access.

Keyswitch on door

A key is needed to access the lift. Can be used to both call and send the lift. School locking function.

 

Hold open arm for door closer

Keeps the door open until the user manually closes the door.

Door type GD double glass

Door with two glass panels.

 

Door handles stainless steel

Increases the stylish look of the lift.

Landing faceplates stainless steel

Gives the lift a more stylish impression, especially when combined with the stainless steel door handles.

 

Inner ceiling with light fitting

Fluorescent light fitting. Brightens the shaft. Complies with LUX regulations.

 

Phone Socket

Phone socket, Swedish standard. For connecting a phone.

 

Phone

Wired phone, basic model. Can be equipped with a GSM module. GSM module needs to be completed with a SIM card.

Autodialler – Safeline MX

Activated when the alarm button is pressed. Mounted in the platform panel it adds to the clean look of the lift. Can be equipped with a GSM module. GSM module needs to be completed with a SIM card.

 

External alarm sounder

Loud signal to attract attention in case of emergency. Activates when the alarm button is pressed.

Landing indicator

Digital display positioned at the platform faceplate. Can also be fitted with a voice announcer that is available in several languages.

 

Arrival signal

An audible signal when the platform arrives at each landing.

Remote control, radio/infra-red

Provides remote controlled access to the lift. Radio control is a cheap and easy solution while infra-red control is better suited if the building is already equipped
with infra-red units.

 

External landing faceplates

Provides the possibility to place the landing faceplates at a distance from the lift.

 

230 volt 3-phase

If the building/site does not support 400 volt 3-phase.

230 volt 1-phase frequency conv.

If the building/site does not support 230 or 400 volt 3-phase or if you simply want to benefit from the built-in function for smoother start and stop.

 

Soft start

Provides a smoother start when a landing button is pressed.

Automatic lubrication system

Oils the drive screw at regulated time intervals even when the lift is not in use.

 

Electrical cabinet alternate position

If the normal position of the electrical cabinet proves difficult we offer the option to move the electrical cabinet to another landing or to position it remotely in a lockable casing.

Keyswitch on platform

Locks the platform functions and prohibits unauthorized use.

 

Platform 1100x1480

Wider platform size for more space.

Platform flooring

Vinyl, rubber, aluminum or simply no flooring at all. Vinyl in several different wood finishes and rubber in several different colors.

 

 

Handrail stainless steel

Gives the platform a more stylish impression, especially when combined with the stainless steel platform faceplate.

Platform faceplate stainless steel

Increases the stylish look of the platform.

 

Full height console

If there is a desire to make the lift look more like a conventional lift this is a good choice. Fluorescent light fitting and a mirror is standard but spotlights are also available. Only available for platform sizes 1000x1480 and 1100x1480.

Fold down seat

Gives you the opportunity to sit down while using the lift. Solid wood seat and chromed brackets.